| PHYSICAL CONDITION |
| Constructions: |
Polycarbonate radome,detachable cable/connector for easy mount, rubber-O-ring between top radome and screw base for waterproof |
| Dimensions: |
90.5mm(Dia.) × 108.5mm(H) |
| Weight: |
150grams (w/o cable & connector). |
| Color: |
Standard in ivory white, other colours available upon request. |
| Base mounting |
FB1 1"-14 UNS (optional) |
| Cable & Connector |
| RF cable: |
10 meter RG58 |
| Pulling strength: |
6 Kg @ 5sec. molded plastic on connector end for strain relief. |
| Connector |
SMA(M) or TNC(M) or BNC(M) ------- |
| Antenna Element |
| Center Frequency: |
1575Mhz & 1596-1610 MHz |
| Polarization: |
R.H.C.P. (Right Handed Circular Polarization). |
| Bandwidth |
10 MHz min. @S11-10 dB, 24MHz typ. @S11 |
| Gain @ 10o Elevation: |
2 dBi typical. |
| Axial Ratio: |
3 dB max. |
| Output VSWR: |
1.5 max |
| Output Impedance: |
50 ohm |
| Low Noise Amplifier |
| Power Gain: |
1570 Mhz : 29db typ 1610 Mhz : 29db typ |
| Bandwidth: |
50 MHz min. |
| Noise Figure: |
1.5 typ |
| Outer Band Attenuation: |
20 dB min. @ Fo +/-50 Mhz. |
| Supply Voltages: |
2.3~5.5V DC. |
| Current Consumption: |
2.5V : 6.6mA Typ. 3V: 8.6mA Typ. 4V: 12.6mA Typ. 5V: 16.6mA Typ. |
| Output Impedance: |
50W ohm |
| Overall Performance: (antenna element, LNA & coax cable) |
| Center Frequency: |
1570 ~1610 Mhz. |
| Gain: |
At 90o vertical to sky 30 ± 4.5dBi (cable loss) Note:1 Mounted on the 60mm x 60mm square ground plane |
| Noise Figure: |
2.0 max. |
| Axial Ratio: |
3 dB max. |
| Bandwidth: |
10MHz min. |
| VSWR: |
2.0 max. |
| Output Impedance: |
50W ohm |
| Environmental |
| Operating Temperature: |
-40°C~ +85°C |
| Storage Temperature: |
-40°C~ +90°C |
| Relative Humidity: |
95% non-condensing. |
| Water Resistance: |
100% waterproof. |
